HOW TO MAKE A LEATHER WALLET. Making leather Card Holder with PATTERN



▶ It is time for something smaller – this time we have a leather wallet pattern for you, to make at
home! The wallet has a regular shape – it is rectangular. When opened, it has six pockets – three
on the left and three on the right. By default the higher the pocket is the deeper it is. Number of
pockets – six – will perfectly fit your credit cards as well as your driving license, also your ID card
will find place there. The dimensions after opening are as follows:

# 2 pockets wallet: 10,6 cm x 16,4 cm | 4.3; x 6.7″
# 4 pockets wallet: 11,6cm x 16,4 cm | 4.8 x 6.7″
# 6 pockets wallet: 13,6 cm x 17 cm | 5,6 x 7″

The wallet is easy to make, so you will definitely handle it – our pattern will really help you with
that – it has all the necessary dimensions or cuts. You can also add a embellishment or
inscription on your wallet – we leave it to your imagination. Work!

▶ How to make leather Card Holder Wallet. Making a leather Card Holder Wallet with Pattern. Handmade wallet. In this video i will show you diy of leather wallet and a few leather craft techniques with basic leather craft tools.

👉Subcribe the channel to stay up with all new creations and patterns

▶PATTERN :
▶CLOSED GROUP:
▶Instagram:

▶ Leather Pattern includes holes marked, 3 different set – 2/4/6 pockets versions.
Dimensions: 1# 11,5 x 7,5 cm | 4,5″ x 3
2# pattern has 1 pocket each side
3# pattern has 3 pockets each side

▶ Tools you need:
– sharp knife
– 1,2-1,5mm hole puncher or pricking irons or awl
– hammer
– 2 needles
– paper tape
– a home printer

▶ Materials you need:
– Leather (preferable 2-3oz (1mm) and 4-5oz for side panel
– Waxed thread (preferable 0,8-1 mm)

Prepare & cutting patterns:
Good luck 🙂

source